1006 DUMMY DOME CCTV CAMERA

1. Technical Specifications

• Indoor use
• Wall or ceiling installation
• Blinking red LED for maximum realism
• High quality ABS material
• Color: Black
• Diameter: 115MM  Height:70MM
• Warning sticker & screws included

1. Batteries installation
2. Open the cover under the camera to access battery compartment
3. Insert the 2 pcs of AALR6 batteries following the polarity
4. Replace the cover
5. 
   

1. Installation
2. Select a location to install the camera, insuring that there are no piping, plumbing or electrical wiring systems underneath the wall or ceiling.
3. Mark holes to drill, using the included installation template.
4. Drill holes, put the anchors and screws, letting their heads jut out 4 to 5 mm.
5. Place the camera back holes onto the screw heads and lock it by turning counter clockwise.
6. 
   

1. Care and maintenance
2. To clean the case, simply use a soft slightly damp cloth with water and wipe dry immediately.
3. Never use chemicals to clean the case, as they may cause damage to the plastic and cause the alarm not to function.
4. 
   

1. Batteries
2. Replace batteries when the blinking red LED starts to weaken.
3. Use 2 AA LR6 batteries
4. Do not throw batteries with domestic waste.
5. Use dedicated recycling containers.