2000BS SOLAR POWERED DUMMY BULLET CCTV CAMERA

Technical Specifications

• Indoor use or outdoor use
• Wall or ceiling installation
• Blinking red LED for maximum realism
• High quality ABS material
• Color: Black
• Diameter: 20.5 * 16.5 * 10.3cm
• Warning sticker & screws included
• Power supply: 2 x AA batteries (not included) 

Solar Panel power or use batteries

• Use a screw driver open the cover of the back of camera 
• Insert the 2 pcs of AALR6 batteries following the polarity(If without batteries, the flashing LED is working only under the sunshine condition)
• Replace the cover and install screw tightly

Installation

• Select a location to install the camera, insuring that there are no piping, plumbing or electrical wiring systems underneath the wall or ceiling.
• Mark holes to drill, using the included installation template.
• Drill holes, put the anchors and screws, letting their heads jut out 4 to 5 mm.
• Place the camera back holes onto the screw heads and lock it by turning counter clockwise.

Care and maintenance

• To clean the case, simply use a soft slightly damp cloth with water and wipe dry immediately.
• Never use chemicals to clean the case, as they may cause damage to the plastic and cause the alarm not to function.

Batteries

• Replace batteries when the blinking red LED starts to weaken.
• Use 2 AA LR6 batteries
• Do not throw batteries with domestic waste.
• Use dedicated recycling containers.